Make a Feeding Tube Holder
Cover
9 Steps
0 I Made It!
1
step

Ensure that both pipe hangers have their screws in place (they should have each come screwed together), the small pipe hanger will attach to the IV pole and the larger one will hold the feeding tube. Next, wrap the ring of the larger pipe hanger with a soft tape (athletic tape/medical tape/etc.) so there aren’t sharp edges.

2

Step 1: Set-up Ensure that both pipe hangers have their screws in place (they should have each come screwed together), the small pipe hanger will attach to the IV pole and the larger one will hold the feeding tube. Next, wrap the ring of the larger pipe hanger with a soft tape (athletic tape/medical tape/etc.) so there aren’t sharp edges.

3
4

Step 2: Assemble Device Screw together the two pipe holders using the two screws and nuts. You can customize the length.

5
6

Step 3: Assemble on IV Pole Unscrew the copper pipe hanger, place the two components around the IV pole and reinsert the screws to secure it in place.

7
8

Step 4: Customization Inserts You can 3D print custom inserts that allow your feeding tube holder to hold tubes of different sizes.

9